These "Wedge" mounts are specifically designed for the Phoenix PHX series Bow. These mounts are designed to rotate the mount base to put the GPS/Sonar screens in line with the Trolling Motor Pedal and sitting the screens Level.
Dual Stack Bow Brackets kit includes a Heavy Duty Replacement Factory Plate
| Disclaimer: The 2020+ Phoenix Elite and newer PHX with fiberglass Shroud (10" x 16" Plate Type A, D, G, H), The Factory Bow Plate has NO set hole pattern for us to use to put holes in our main plate for mounting, so until Phoenix standardizes the mounting hole pattern, BBT will not put these holes in our plates. You will need to lay your factory plate or Dual Fiberglass shroud on top of our plate and mark your hole pattern in our plate and Drill holes to match your Bow pattern. Make sure that the holes are marked from the top side so it will match your hole pattern in your Boat. You will use the Factory screws to mount the main plate back in place. |
These "Wedge" mounts are specifically designed for the Phoenix PHX and 721 / 818 Pro XP series Bow. These mounts are designed to rotate the mount base to put the GPS/Sonar screens in line with the Trolling Motor Pedal and sitting the screens Level.
New: There is now an option in the dropbox to get either the "Standard Stack Top" or "Off-Set Right" Stack Top. The "Offset Right" tops are designed to shift both units to the right 2 inches allowing for better control of the Trolling Motor Cables, especially the Garmin Force TM and Lowrance Ghost TM large cables. These will fit any Dual Stack mount from BBT. See Example Pics. We will send the correct Top to fit what Boat Model you are buying for on the order.
THERE ARE 4 DIFFERENT PLATE SIZES
(**Plate D & G are same size**)
Dual Plate Sizes
FOR MORE INFORMATION ON THE "HOOD" STYLE BOW MOUNT - PLEASE CLICK HERE.
| Do not go by the models listed on the pictures of these bows. Phoenix has several different bow shrouds they can use on different model boats. Please look at the boat and pick which type bow you have and also "measure" the plate size that is needed. If you are not sure you can email a picture of the bow and the plate measurments and I can help you chose. Email - This email address is being protected from spambots. You need JavaScript enabled to view it. |
|
PLEASE READ Special Warning: We have changed the way you pick your Sonar Units. The Sonar Companies are adding new model and size sonars to their line ups all the time and it is very hard to keep all of them listed in the drop boxes. So now we have text boxes to list your Sonars. Sonar Brand and Size Box is for the Sonar Manufactuer and the Size, what the manufacturer calls them, example 9, 12, 15, 16, etc... Sonar Model Box is for the Model Graph you want to mount, examples - If you are mounting a Giant NBT, ICU, Flex, Power Pole, Monster Marine, and Garmin Enclosures, etc..., then be sure you visit the "Large Monitor Mounts" at the top of the main menu - We have recipes for almost every Boat Brand, Model, so if you do not know exactly what you need to get your set up correct, then Email me at This email address is being protected from spambots. You need JavaScript enabled to view it. and I will send you the links to exactly what you need. |
|
***All Sonars require to be a Gimbal Mounted Unit*** Warning: If the Brand, Size and Model boxes are NOT filled out with all the info requested then this could affect our ability to fill the order in a timely manner. |
