Please read ALL notes on the pages of the mount that you are looking to purchase, this will save mis-ordered mounts from being shipped and prevent you from having to re-order and then return the wrong product.
Phoenix Triple Bow Mount
If your bow looks like one of the bows above, this mount will fit. Please choose the correct style in the options below.
| Disclaimer: The 2020+ Phoenix Elite/PHX and newer XE models with Factory Dual Bow Fiberglass shroud or a 10" x 16" Plate Size, The Factory Bow Plate has NO set hole pattern for us to use to put holes in our main plate for mounting, so until Phoenix standardizes the mounting hole pattern, BBT will not put these holes in our plates. You will need to lay your factory plate or Dual Fiberglass shroud on top of our plate and mark your hole pattern in our plate and Drill holes to match your Bow Insert pattern. Make sure that the holes are marked from the top side so it will match your hole pattern in your Boat when laid in place. |
If you have a question concerning the graphs you want to mount, call the shop and ask - 706-217-6161
Each Triple mount comes with a replacement bow plate. We have also integrated a slider bar system for the Top and Bottom row to be able to slide the units to the left and right to help miss whatever brand trolling motor you have.
**Backer plates are included for all plastic shroud Phoenix models**
| Do not go by the models listed on the pictures of these bows. Phoenix has several different bow shrouds they can use on different model boats. Please look at the boat and pick which type bow you have and also "measure" the plate size that is needed. If you are not sure you can email a picture of the bow and the plate measurments and I can help you chose. Email - This email address is being protected from spambots. You need JavaScript enabled to view it. |
FOR MORE INFORMATION ON THE "HOOD" STYLE BOW MOUNT - PLEASE CLICK HERE.
Hood Style not available for Dash Type "F"
Types A, C, D, G and H are HOOD style ONLY
Types B and E - "Hood" is optional
2020+ 919/920/921 Elite Dual Stack "Hood" Bow Mount (PH121 / w D132 leveler)
If your bow looks like this, then this mount will fit.
| Disclaimer: The 2020+ Phoenix Elite/PHX with Factory Dual Bow Fiberglass shroud or a 10" x 16" Plate Size, The Factory Bow Plate has NO set hole pattern for us to use to put holes in our main plate for mounting, so until Phoenix standardizes the mounting hole pattern, BBT will not put these holes in our plates. You will need to lay your factory plate or Dual Fiberglass shroud on top of our plate and mark your hole pattern in our plate and Drill holes to match your Bow Insert pattern. Make sure that the holes are marked from the top side so it will match your hole pattern in your Boat when laid in place. |
New: There is now an option in the dropbox to get either the "Standard Stack Top" or "Off-Set Right" Stack Top. The "Offset Right" tops are designed to shift both units to the right 2 inches allowing for better control of the Trolling Motor Cables, especially the Garmin Force TM and Lowrance Ghost TM large cables. These will fit any Dual Stack mount from BBT. See Example Pics. We will send the correct Top to fit what Boat Model you are buying for on the order.
FOR MORE INFORMATION ON THE "HOOD" STYLE BOW MOUNT - PLEASE CLICK HERE.
(2020-2024) 919/920/921 Elite Single Dash Mount
If your dash looks like this, then this mount will fit.
If you have very large units and it is not listed in the drop down menu for GPS/Sonar, then go to (2020-2024) 919/920/921 Elite MEGA Single Dash Mount
These Dash Mounts DO NOT Fit the XE Models - The 2024 Phoenix 20/21 XE Models and 2025 919/920/921 Elite Models use the Fiberglass Shroud Only - Go to "Shelf Shrouds"
(2020-2024) 919/920/921 Elite MEGA Single Dash Mount
If your dash looks like this, then this mount will fit.
If you have smaller units that are not listed in the drop down menu for GPS/Sonar, then go to the (2020-2024) 919/920/921 Elite Single Dash Mount
Disclaimer: The Apex Factory Gimbal brackets have a Hole Pattern in them that "Does Not" match any previous hole pattern used by Humminbird in the past. We will send a Hole pattern with mounts that have a Apex model graph and you will need to mark your factory Apex gimbal Bracket and drill 9/32 holes them to match our pattern. Note: The BBT Cheyenne Series Apex Gimbal Brackets will have the same hole pattern in them as Helix and Solix Gimbal Brackets.
These Dash Mounts DO NOT Fit the XE Models - The 2024 Phoenix 20/21 XE Models and 2025 919/920/921 Elite Models use the Fiberglass Shroud Only - Go to "Shelf Shrouds"
(2020-2024) 919/920/921 Elite Dual Dash Mount
If your dash looks like this, then this mount will fit.
If you have very large units and it is not listed in the drop down menu for GPS/Sonar, then go to (2020-2024) 919/920/921 Elite MEGA Dual Dash Mount
These Dash Mounts DO NOT Fit the XE Models - The 2024 Phoenix 20/21 XE Models and 2025 919/920/921 Elite Models use the Fiberglass Shroud Only - Go to "Shelf Shrouds"
Important
***The Bass Boat Technologies mount System utilizes the Factory Gimbal Brackets for each unit. If your units are currently Flush Mounted in the Dash or Bow, you will need to get the Gimbal Brackets to fit your unit.
No Gimbal Brackets or Knobs are supplied. All Mounting hardware is supplied with each Mount System. ***
Each Custom BBT mount comes with a replacement plate (3/16 Alum) and the mount systems are already attached and set for your choice of GPS/Sonar's
Dual Mount Conversions
Dash Mount Conversions: Dash Conversions from a Single Mount to a Dual Mount and visa-versa are not possible.
The Single and Dual mounts are totally different Designs. If your mount is under a Year old, we do consider Trade-ins to upgrade.
  |
BASS BOAT TECHNOLOGIES
3975 Ruby Drive
Cohutta, Ga. 30710
Phone # 1 & 2 - 706-217-6161
Phone # 3 - 706-852-2457
Mon-Fri (9:00am - 5:30pm EST)