If your bow looks like this, then this plate will fit.
Most model graphs (due to width of the Gimbal Bracket) will not fit straight to the Bow Plate, so a 1 1/2" Add-On riser will be necessary to mount your graph. To determine if you need the Add-on riser, if you can fit your gimbal bracket between the switch on right and the TM Plug-in, then you do not need an add-on riser, but if the gimbal bracket will not fit between the switch on right and the TM Plug-in, then you will need the Add-on Riser. This riser is listed as a Dual Stack Add-on riser, but that is what we will use to fit the graph you picked in the Drop box.
Get 1 1/2" Add-on riser here - ADD-ON RISER
BBT will supply a Larger size # 10 screws with all Dash and Bow mounts. If you need to drill new holes, use a 5/32 drill it to install the
BBT screws and caps.