Click for more information

SHIPPING NOTICE:  Shipping will be same day or next business day on most orders.

The Silver Heavy Duty Gimbal Brackets that are in some mount pictures are NOT included with any mount.
They are optional and can be purchased here.

 Please read ALL notes on the pages of the mount that you are looking to purchase, this will save mis-ordered mounts from being shipped and prevent you from having to re-order and then return the wrong product.


If your bow looks like this, then this mount will fit.

This special bow mount is designed for the BassCat Puma STS only. The main base is designed so that you will be able to change just the top part to go to a Single Mount, Dual Stack or Triple Stack mount. The base also allows you to slide the top part frontwards and rearwards and you will also be able to rotate the top part to get the best angle for your personal viewing of the graph.

This is the premium Bow mount for the Puma STS.  The Cup/Tool holder is included. It is recommended that if you run a Ultrex TM, that you do get the TM Cable Bracket. The Triple mount.

Bottom and Top Slider Bars enable you to slide your units to the left or right for the best fit on your boat. Be sure to consider what size graphs you are mounting because you only have so much room to work with.

It is highly recommended that you also get our HD Gimbal brackets for your triple mount, get shorty brackets for the Bottom row and Regular size for the Top row. Get them here: Heavy Duty Gimbal Brackets

 The Triple mount weighs - 13.2 Lb

Starting At $435.00
* Enter Boat Year:

* Enter Boat Make:

* Enter Boat Model:

* What Trolling Motor Do You Have?:

* With or Without Bracket?:

* Top:

* Bottom Left:

* Bottom Right:


***The Bass Boat Technologies mount System utilizes the Factory Gimbal Brackets for each unit. If your units are currently Flush Mounted in the Dash or Bow, you will need to get the Gimbal Brackets to fit your unit.

No Gimbal Brackets or Knobs are supplied. All Mounting hardware is supplied with each Mount System. ***

Each Custom BBT mount comes with a replacement plate (3/16 Alum) and the mount systems are already attached and set for your choice of GPS/Sonar's

Dual Mount Conversions

 Dash Mount Conversions: Dash Conversions from a Single Mount to a Dual Mount and visa-versa are not possible.

The Single and Dual mounts are totally different Designs. If your mount is under a Year old, we do consider Trade-ins to upgrade.

Note: The BBT Heavy Duty Gimbal Brackets are Highly recommended for bow mounts. 
Rule of thumb on the gimbal brackets are to get "Shorty Gimbals for the Bottom Row and Regular Height for the Top Graph.
You can get them here - HD Gimbal Brackets

Hood Module

Hood Bow Mount Information

This New "Hood" style Bow mount design further improves BBT bow mounts and continues as the "Leader in Innovations" to electronic mounting solutions.

BBT’s main endeavor is to design new products as well as improve existing Dash and Bow mounts. This New "Hood" type Bow mount does exactly what it was named for, it is like Raising the Hood on your vehicle to get to the engine components, except it allows access to your wiring under the Bow panel.

The "Hood" style Bow mounts:

1. Does allow you access to your wires in the bow area without removing the main bow plate.

2. It also allows you to thru-bolt the main bow panel so you don't have to worry about the holes getting stripped out using SS wood screws in the Fiberglass, which gives you piece of mind that you know that it will hold up in the roughest water conditions.

3. BBT also added nut inserts into the main plate for the Leveler to attach to main plate.

4. You will be able to take out 4 machine screws and rotate the top over so you can get access to that area.

5. The New "Hood" mount should also make installation much easier because you have new easy access that you have never had before.

BBT’s goal is to make this “Hood” style mount for as many Brand and year model boats as possible. The only limitation is the size of the factories’ bow panel size. We need to be able to fit the components and laser cut out an access hole in the BBT bow panels and still have a good amount of material left over for the main panels attachment to the boat without giving up mounting integrity.

All bows are not the same, some of the bow’s fiberglass is cut out at the factory either by having a flush mounted graph or they cut it out for their access to the bow area for rigging purposes, so that being said, some models like the Nitro models that have a 3/8” HDPE plate over the Bow area (which works with our current bow mount for that boat), you would need to mark the access hole from our plate to the HDPE plate and cut that out so you will have a access hole there when you install the new mount. The same goes for any boat that has not been cut out at the factory.

BBT is working on these new style mounts and sending them out for testing and fitment. Once approved, you will have this choice in the Drop Down boxes on the order spec pages of your Brand and Model Boat Dual and Triple Bow mounts. If you are wondering if we have your particular bow or are working on it, then you can email from the website “Contact” page at the top of the Menu screen. 

Example Images:

 SSL CertificateMade In The USA