Please read ALL notes on the pages of the mount that you are looking to purchase, this will save mis-ordered mounts from being shipped and prevent you from having to re-order and then return the wrong product.

  • 2018+ Xpress X17-X21 Dual Dash Mount

    • XPRESS X17-X21 - 2018 - 2019-Style A
      Style A - 2018-2019 Dash
    • EXPRESS H18 - STYLE B DASH - WEBSITE
      Style B - 2020-2022 Dash
    • StyleC-xpress
      Style C - 2023 + Dash

    If your dash looks like this, then this mount will fit

    Please choose your dash style in the options below.

    If you have very large units and it is not listed in the drop down menu for GPS/Sonar, then go to the 2019+ Xpress X17-X21 MEGA Dual Dash Mount

    ALL XPRESS MODELS - Some Year models of the Xpress Boats - If your boat has Hydraulic Steering, then your steering wheel should measure from the dash to the inside top edge of steering wheel, it should read about 6 3/8 - 6 5/8" or more, If that is the case, then no spacer should be needed in most cases. If it is less than 6 3/8" - 6 5/8" on that measurement, then you need to get a steering wheel spacer. (See example - Picture used for Style B dash, this picture shows a Boat without Hydraulic Steering)

    Click here to get the correct spacer if needed. https://bassboattech.com/accessories/steering-spacers-and-kits/ranger-steering-space

  • 2018+ Xpress X17-X21 MEGA Dual Dash Mount

    • XPRESS X17-X21 - 2018 - 2019-Style A
      Style A - 2018-2019 Dash
    • EXPRESS H18 - STYLE B DASH - WEBSITE
      Style B - 2020-2022 Dash
    • StyleC-xpress
      Style C - 2023 + Dash

    If your dash looks like this, then this mount will fit.

    Please choose your dash style in the options below.

    These Mounts are Designed to Secure the Larger GPS/Sonar Units.

    Disclaimer: The Apex Factory Gimbal brackets have a Hole Pattern in them that "Does Not" match any previous hole pattern used by Humminbird in the past. We will send a Hole pattern with mounts that have a Apex model graph and you will need to mark your factory Apex gimbal Bracket and drill 9/32 holes them to match our pattern.

    Note: The BBT Cheyenne Series Apex Gimbal Brackets will have the same hole pattern in them as Helix and Solix Gimbal Brackets.

    ALL XPRESS MODELS - Some Year models of the Xpress Boats - If your boat has Hydraulic Steering, then your steering wheel should measure from the dash to the inside top edge of steering wheel, it should read about 6 3/8 - 6 5/8" or more, If that is the case, then no spacer should be needed in most cases. If it is less than 6 3/8" - 6 5/8" on that measurement, then you need to get a steering wheel spacer. (See example - Picture used for Style B dash, this picture shows a Boat without Hydraulic Steering)

    Click here to get the correct spacer if needed. https://bassboattech.com/accessories/steering-spacers-and-kits/ranger-steering-space

  • 2018+ Xpress X17-X21 MEGA Single Dash mount

    • XPRESS X17-X21 - 2018 - 2019-Style A
      Style A - 2018-2019 Dash
    • EXPRESS H18 - STYLE B DASH - WEBSITE
      Style B - 2020-2022 Dash
    • StyleC-xpress
      Style C - 2023 + Dash

    If your dash looks like this, then this mount will fit.

    Please choose your dash style in the options below.

    These Mounts are Designed to Secure the Larger GPS/Sonar Units.

    Disclaimer: The Apex Factory Gimbal brackets have a Hole Pattern in them that "Does Not" match any previous hole pattern used by Humminbird in the past. We will send a Hole pattern with mounts that have a Apex model graph and you will need to mark your factory Apex gimbal Bracket and drill 9/32 holes them to match our pattern.

    Note: The BBT Cheyenne Series Apex Gimbal Brackets will have the same hole pattern in them as Helix and Solix Gimbal Brackets.

    ALL XPRESS MODELS - Some Year models of the Xpress Boats - If your boat has Hydraulic Steering, then your steering wheel should measure from the dash to the inside top edge of steering wheel, it should read about 6 3/8 - 6 5/8" or more, If that is the case, then no spacer should be needed in most cases. If it is less than 6 3/8" - 6 5/8" on that measurement, then you need to get a steering wheel spacer. (See example - Picture used for Style B dash, this picture shows a Boat without Hydraulic Steering)

    Click here to get the correct spacer if needed. https://bassboattech.com/accessories/steering-spacers-and-kits/ranger-steering-space

  • 2018+ Xpress X17-X21 Single Dash Mount

    • XPRESS X17-X21 - 2018 - 2019-Style A
      Style A - 2018-2019 Dash
    • EXPRESS H18 - STYLE B DASH - WEBSITE
      Style B - 2020-2022 Dash
    • StyleC-xpress
      Style C - 2023 + Dash

    If your dash looks like this, then this mount will fit.

    Please choose your dash style in the options below.

    If you have very large units and it is not listed in the drop down menu for GPS/Sonar, then go to the 2019+ Xpress X17-X21 MEGA Single Dash Mount

    ALL XPRESS MODELS - Some Year models of the Xpress Boats - If your boat has Hydraulic Steering, then your steering wheel should measure from the dash to the inside top edge of steering wheel, it should read about 6 3/8 - 6 5/8" or more, If that is the case, then no spacer should be needed in most cases. If it is less than 6 3/8" - 6 5/8" on that measurement, then you need to get a steering wheel spacer. (See example - Picture used for Style B dash, this picture shows a Boat without Hydraulic Steering)

    Click here to get the correct spacer if needed. https://bassboattech.com/accessories/steering-spacers-and-kits/ranger-steering-space

     

  • Bigfoot III - (Dual Stack Bow Mount)

    Examples:

    This new style Bigfoot III Mount is designed to be able to change the position of the Stack Top or Triple top to a rearward or forward position to better balance the units out evenly. 

    You can choose 3 different Base Heights, 4", 4-3/4", or 5-1/2" tall base height.

    We also offer a "Off-Set Front" option to have the ability to have the units more forward than the standard Bigfoot Series mount. The Off-Set Forward will come in handy to help the closest unit not hit your shin whenever you can't move the mounting feet forward due to the bow design of your boat being more "V" shaped.

    Looking for a Triple Bow Mount - then go here: Bigfoot III - (Triple Bow Mount)

  • Bigfoot III - (Triple Bow Mount)

    Additional Images:

    • EMSS4034
      Bigfoot III Example
    • NPBN7439
      Triple Mount Floor Brace

    This new style Bigfoot III Mount is designed to be able to change the position of the Stack Top or Triple Top to a rearward or rorward position to better balance the units out evenly. 

    You can choose 3 different Base Heights, 4", 4-3/4", or 5-1/2" Tall Base Height.

    We also offer a "Off-Set Front" option to have the ability to have the units more forward than the standard Bigfoot Series mount. The Off-Set Forward will come in handy to help the closest unit not hit your shin whenever you can't move the mounting feet forward due to the bow design of your boat being more "V" shaped. We will also send bottom bar braces that mount to the deck of the boat to better support the units. The braces will fit most all boats that utilize the Bigfoot III Mount.

    Looking for a Dual Stack?  Then go to the Bigfoot III - (Dual Stack Bow Mount)

Important

***The Bass Boat Technologies mount System utilizes the Factory Gimbal Brackets for each unit. If your units are currently Flush Mounted in the Dash or Bow, you will need to get the Gimbal Brackets to fit your unit.

No Gimbal Brackets or Knobs are supplied. All Mounting hardware is supplied with each Mount System. ***

Each Custom BBT mount comes with a replacement plate (3/16 Alum) and the mount systems are already attached and set for your choice of GPS/Sonar's

Dual Mount Conversions

 Dash Mount Conversions: Dash Conversions from a Single Mount to a Dual Mount and visa-versa are not possible.

The Single and Dual mounts are totally different Designs. If your mount is under a Year old, we do consider Trade-ins to upgrade.

 SSL CertificateMade In The USA